10G Cat6a UTP Keystone Jack 180 degree
Â
Description:Â
1.  Keystone Jack, CAT 6A, UTP Type, 180°punching direction, for connecting application of communication ports in working area.
2. A compact & ingenious designing, with the punching sequence direction marks on the sides of keystone jack. That can provides a
correct and quick guide for punching and connectiong operation. And the fastener hats will make sure the cable can be fixed reliably in the IDC clips.Â
3.  According to the standard of ISO/IEC 11801:2002 class & ANSI/TIA/EIA 568-B.2-1 CAT.6A, T568A punching sequence and T568B. Punching sequence are both compatible.Â
4.  Connection type: FCC connector for RJ45 patch cord and IDC for 4-pair Cat.6A cables.Â
5.  Fitting for the Cat.6A general cable distribution system. Compatible for Cat 6A, Cat.6 and Cat.5e systems.
Â
Technique Characteristics:Â
1.  Material of plastic parts: PC UL94V-0Â
2, Insertion dependability: 750 times.Â
3.  Material of the IDC clips: Tinned phosphor bronze with golden plated 3U,6U,15U, 30U,50U at option. Fitting for 22AWG/23AWG/24AWG Cables. Punching short type.Â
4. Dependability: 250 times.Â
5.  Standard 110 punching tool.
Â
Housing |
PCÂ UL94V-0 |
PCB |
1.FR4 1.6mm(0.04") thickness.      2.4 layers. |
Contact |
1.PC Ul94V-0 2.Phosphor bronze: 0.45mm(0.018") Diameter 3.Gold plating: 3 U"/0.0762um ~ 50 U"/1.27um |
Electrical |
1.According to UL 1863. 2.Current rating: 1.5 Amp Max. 3.Voltage rating: 150 Volts. 4.Contact resistance: 20 m-ohm. 5.Insulation Resistance: 500M-ohm. 6.Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min. |
Overall Diameter |
1.Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements. 2.Meet TIA/EIA TSB-40. 3.Meet ISO/IEC Generic Cabling Standard 11801. 4.Meet CENELEC Generic Cabling Standard EN50173. |
Performance |
Pass FLUKE test |
10G Cat6a UTP Keystone Jack 180 degree
Â
Description:Â
1.  Keystone Jack, CAT 6A, UTP Type, 180°punching direction, for connecting application of communication ports in working area.
2. A compact & ingenious designing, with the punching sequence direction marks on the sides of keystone jack. That can provides a
correct and quick guide for punching and connectiong operation. And the fastener hats will make sure the cable can be fixed reliably in the IDC clips.Â
3.  According to the standard of ISO/IEC 11801:2002 class & ANSI/TIA/EIA 568-B.2-1 CAT.6A, T568A punching sequence and T568B. Punching sequence are both compatible.Â
4.  Connection type: FCC connector for RJ45 patch cord and IDC for 4-pair Cat.6A cables.Â
5.  Fitting for the Cat.6A general cable distribution system. Compatible for Cat 6A, Cat.6 and Cat.5e systems.
Â
Technique Characteristics:Â
1.  Material of plastic parts: PC UL94V-0Â
2, Insertion dependability: 750 times.Â
3.  Material of the IDC clips: Tinned phosphor bronze with golden plated 3U,6U,15U, 30U,50U at option. Fitting for 22AWG/23AWG/24AWG Cables. Punching short type.Â
4. Dependability: 250 times.Â
5.  Standard 110 punching tool.
Â
Housing |
PCÂ UL94V-0 |
PCB |
1.FR4 1.6mm(0.04") thickness.      2.4 layers. |
Contact |
1.PC Ul94V-0 2.Phosphor bronze: 0.45mm(0.018") Diameter 3.Gold plating: 3 U"/0.0762um ~ 50 U"/1.27um |
Electrical |
1.According to UL 1863. 2.Current rating: 1.5 Amp Max. 3.Voltage rating: 150 Volts. 4.Contact resistance: 20 m-ohm. 5.Insulation Resistance: 500M-ohm. 6.Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min. |
Overall Diameter |
1.Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements. 2.Meet TIA/EIA TSB-40. 3.Meet ISO/IEC Generic Cabling Standard 11801. 4.Meet CENELEC Generic Cabling Standard EN50173. |
Performance |
Pass FLUKE test |
Aluminum Lighting Led Bulb,Led Bulb Light,Corn Led Bulb Lights
Homi Lighting Co., Ltd. , http://www.86lamps.com