Kai Bor C3, Kai Bo C3 ninth generation brush machine [with firmware]

What are the system errors in the ninth generation of the Kaibor C3 and Kaiboer C3? Of course it is a flash, or can also be called upgrade firmware, then open Bor C3 and open Bor C3 ninth generation how to brush it? This is the topic that the author wants to discuss with everybody today, the following author will share Kaibro C3/C3 ninth generation brushing tutorial for everybody, will offer the firmware package at the same time, the interested friend must not miss.



U disk brush tutorial (general)

1, if you use U disk or mobile hard disk upgrade, the file is FAT32 format, if it does not need to format the process;

2. Extract the downloaded firmware to the U disk or the root directory of the removable hard disk, and then insert the upgraded USB disk or removable hard disk into the USB interface behind the box (note that the back, do not use the interface next to the box);

3, open open Bor C3, open Bor C3 ninth generation, enter the main interface, and then click Settings - Upgrade - select the firmware where the drive letter, OK, after the upgrade restarts, red and blue lights flash alternately, turn blue after a few minutes Lights, automatic restart, upgrade screens and processes appear, automatically enter the boot desktop menu, reset the display, connect the network, and you're done (note that in the process of upgrading the power, do not operate, so the process is automatically completed);

The brushing method provided above is the simplest firmware upgrade method, but there are certain conditions, that is, you need to enter the main interface of the system. If the system fails, you cannot enter the boot interface. How does the opener C3/C3 ninth generation brush? See the tutorial below.

1. First download and install the software (PhoenixSuit_EN) on the computer, then download the firmware and put it on the computer.
Brush tool download address, http://
Firmware package download address, http://pan.baidu.com/s/1dDq0tK9 Password: mnjn (C3 latest firmware KIUI 7.0)
http://yun.baidu.com/s/1c0xfMjY (line brush firmware)
http://pan.baidu.com/s/1c0jaQVQ (C3 9th Generation)

2, open the software of the brush machine, and then choose a good firmware to open;


3, to prepare a small thing, you can use the needle to withstand the recovery of a hole in the machine. A health recovery hole between the network port and the optical fiber (the index finger below);


4, withstand, plug the USB interface of the data cable of the mobile phone into the computer, and then insert the other end into the OTG interface on the machine. Do not let go! After the connection, the system will prompt to install the driver. After the driver is automatically installed successfully, the following window will prompt;


5. Click “Yes”, the system enters the status of the flashing machine and releases a health recovery hole. After the upgrade is completed, the system will prompt the upgrade to complete. After the success of the brushing, the first time to enter the system will be slow, which is a normal situation. When the power is slow, do not If you think that the machine is bad, you must wait, oh, if you are prompted KIUI6.0 to stop running, it is generally not connected to WIFI, it is recommended that you immediately upgrade WIFI after booting;




Kaiboer C3, Kaiboer C3 ninth generation brush machine failure how to do

Preparation phase: download the attachment package is MAB_KBE_1.0.3.4 version package (can be restored to the original version)
Download address, http://dl.vmall.com/c0nadb0a7n


1. Decompress the compressed package and copy all the decompressed files to the SD card. (It is best not to keep other files in the SD card);

2. Insert the SD into the machine, connect it to the monitor, and power it on;

3, on the display you can see the installation of the prompts, to be successfully installed, the system automatically restarts;

4, enter the main interface of the system, check the version number and the corresponding APK is normal, if normal, then that is successful;

Note: If you cannot see the high-definition display, connect the light board. If the red and blue lights of the light board flash continuously, it means that the application is installed. After the blue light is completely displayed, you can remove the SD card. The total time is about 3 minutes.

Kaiboer C3, Kaiboer C3 ninth-generation has more than a few brush method and firmware, no longer have to worry about the system BUG, ​​brush back anytime, anywhere.

Downlight

Outdoor Downlights,Adjustable Downlights,Small Led Downlights,Ultra Thin Led Downlight

Jiangmen Liangtu Photoelectric Technology Co., Ltd. , https://www.liangtulight.com