Tianjin street lamp facility construction and operation technical standards
Notice on Promulgating the Technical Standards for the Construction and Operation of Tianjin Street Lamp Facilities
All relevant units:
In order to ensure that Tianjin Road Lighting creates a good visual environment for drivers and pedestrians of various vehicles, and achieves the purpose of ensuring traffic safety, facilitating people's lives and beautifying the urban environment, Tianjin Street Lamp Management Office is in accordance with the “Building Committee of Tianjin†The Notice of the First Batch of Engineering Construction Standards Preparation Plan of the City Construction System (Jianke Education [2007] No. 1243) requires the preparation and completion of the "Technical Standards for the Construction and Operation of Tianjin Street Lamp Facilities". After examination and approval by experts of our committee, the “Technical Standards for the Construction and Operation of Tianjin Street Lamp Facilities†(DB29-188-2008) is now approved as the local engineering construction standard of our city. It has been implemented in our city since September 1, 2008.
All relevant units must conscientiously implement this standard. If there are any unclear and revised opinions in the implementation of the project, please promptly report to the Tianjin Street Lamp Management Office.
This standard is managed by the Tianjin Construction Management Committee.
This standard is interpreted by the Tianjin Street Lamp Management Office for specific technical content.
This standard is subject to the subscription and issuance by the Tianjin Construction Education and Training Center. No unit or individual may reproduce or reproduce it.
Hereby notify
Tianjin Construction Management Committee July 9, 2008
Please download the technical standards for the construction and operation of street lighting facilities in Tianjin: Tianjin street lamp facility construction and operation technical standards.rar
Editor: China Lighting Network Feng Yaoyuan
1.0mm Ribbon Connector is commonly used in electronic devices to connect ribbon cables. It is a type of connector that has a pitch of 1.0mm, which means that the pins are spaced 1.0mm apart. This connector is designed to be used with ribbon cables that have a similar pitch.
The 1.0mm Ribbon Connector is typically used in applications where a high-density connection is required. It is commonly used in computer systems, printers, and other electronic devices that require a high-speed data transfer.
1.0Mm Ribbon Connector,Flat Cable Connector,Flat Ribbon Cable Connector,Flat Ribbon Connector
YUEQING WEIMAI ELECTRONICS CO.,LTD , https://www.weimaiconn.com