Application characteristics of high-frequency equipment High-frequency machine is the most inductive heating equipment with the highest heating efficiency, the fastest speed, low energy consumption and environmental protection. The high-frequency machine is called "high-frequency induction heating machine", also known as high-frequency heating machine, high-frequency induction heating equipment, high-frequency induction heating device, high-frequency heating power supply, high-frequency power supply, high-frequency welding machine, high-frequency induction heating machine, High-frequency induction heaters (welders), etc., as well as medium-frequency induction heating equipment, ultra-high frequency induction heating equipment. The scope of application is very wide.
High-frequency machine features
It can be used in pure PVC or any soft and hard film containing 30% PVC or more. It can be processed for special purposes such as leather or cloth.
Spark suppression of high frequency machine
When a spark is generated, a special electronic circuit automatically cuts off high frequencies to protect the electrodes and products.
High frequency machine protection device
The overcurrent current relay automatically protects the oscillating tube and the rectifier when overcurrent occurs.
High frequency machine's weekly rate is stable
The oscillation rate of this type of machine adopts the international industrial band 27.12MHz or 40.68MHz, and the output peripheral rate is stable, in line with international standards, suitable for local use.
Base site lead-acid battery protector system is the smart resonance pulse technique for 6V/36V cell battery or 6V/36V battery pack in series with 3PCS 2V/12V cells. It is working as a new generation of high-tech products for daily battery maintenance in telecom base site or electrical power system.
It utilizes the energy from battery self-power or floating power supply, to produce a unique smart electronic pulse, then feed back to the battery through the output line, Resonance with coarse and hard lead sulfated crystals in negative plates of batteries and converted to active substance under the reaction of pulse charging current which dissolve lead sulfated crystals, Keeping the battery working at a high efficiency. Under the disturbance by the smart resonance pulse, the new lead sulfate crystal is prevented from being formed, and the service lifespan of the lead-acid battery is prolonged 1~2 times than before.
There will be individual differences in State-Of-Capacity (SOC) and internal resistance (IR Value) of batteries after used for a certain number of years. It is called the battery unbalancing. Due to the total floating charge voltage of the rectifier remains unchanged and keeps constant, when the battery pack is in floating charging status, the floating voltage of the cells with larger internal resistance will be higher than that of the normal battery, resulting in the normal battery's floating voltage is lower. Batteries floating charged in this unbalancing way for a long time will cause the higher voltage cells seriously water dehydrated, and the lower voltage cell is in a state of under charged. This way of vicious spiral formed will accelerate the base site batteries premature failure.
Our protector system set a equalized charging function. If the terminal floating voltage of the battery system is higher than the standard value of protector system designed, the system automatically and smartly switches to the over-voltage balanced working state. When the voltage drops lower than standard value, it automatically changes to smart pulse maintaining state. The decrease of battery internal resistance and the improvement of the battery equalization lead to the battery lifespan prolonged.
Base Site Battery Protector System
Base Site Battery Protector System,Stationary Battery Protector System,Online Battery Smart Protector System,Telecom Base Site Battery Protect System
Shenzhen Daceen Technology Co., Ltd. , https://www.daceen-sz.com