Edison: EDIS High Patio Light Module

In addition to Taiwan's factory, Edison Opto's 12,000-square-meter Dongguan factory was put into operation in 2007. The newly-expanded Yangzhou plant covers an area of ​​67,000 square meters and was trial-produced in June this year. Edison Opto has obtained the SGS ISO-9001 and ISO-14001 international quality and environmental management system certification, and has applied for TS16949 certification. It is believed that its perfect quality management system can fully meet the needs of customer product development.

Edison's 50W LED downlight is still under development, and the picture on the right shows the driver plus the driver.

Edison's EDIS high-bay lamp module is 70% more energy efficient than traditional mercury lamps. The beam angles are 40, 60, 90 and 120 degrees, respectively. Detailed parameters comparisons were made between the 120W LED high-bay lamp and the 400W mercury vapor lamp on the product poster.

As can be seen from the above table, the power consumption of the 120W LED high-bay lamp is 70% lower than the latter based on one year. According to this idea, carbon dioxide emissions can be reduced by 1010kg per year, that is, 72 trees are saved, which is the green environmental protection advocated today.

The Partial Tension Fitting is primarily used for tubular busbar and conductors, hard bus (soft bus) connected with outlet terminal and electrical equipment, conducting with high performance and contact stability.

According to the structure is divided into bus expansion joint, expansion joint, trbular busbar slot type bus bar expansion joint, copper aluminum transition plate, four second clip of variable.

Material generally using a copper aluminum copper alloy parts.

Partial Tension Fitting

Partial Tension Fitting,Aluminum Copper Alloy Fitting,Busbar Expansion Joint,Tubular Busbar Expansion Joint

Jiangsu Chuandu Electrical Technology Co.,Ltd. , http://www.cdepf.com