How to pick a high quality guitar

How to pick a high quality guitar Choosing a guitar needs to be slow. Don't be affected by the boss. No one says that his product is not good. He will say how good he is, how much value he can and ignores him. Of course, there are not enough guitars to meet all the conditions and they are not cheap. The purchasing power, slowly down the standard, there are some guitars, can be adjusted through the late, to improve the previous situation, such as adjusting the neck, bridge, pillow, finger adaptability and so on. There are three steps to choosing a high quality guitar:

The first step: Inaccuracy is the core issue.

After tuning each string according to the tuning standards of the guitar, the 12th product pops out. The 12th product is a harmonic. If it is the same as the 12th product of the string, it is qualified. Check the six strings in this order.

The second step: Second, check the feel.

Poor hand-feeling can force you to take an inappropriate approach to stringing, which greatly hinders the improvement of left-handed technology. When the guitar is tuned to the standard pitch, the distance between the strings and the fingerboard should be about 4 mm at the 14th character. If you are too high, pressing the strings will make you feel strenuous. Otherwise, it will cause you to fight. A good hand senses that if there is no product or any noise, the left-handed finger can easily press any one of the sounds.

The third step: check the sound quality.

Playing the fifth harmonic of the strings, the poorly resonating guitar often fails to produce a bright harmonic. Then on the piano to do a variety of dynamic picking strings, the volume should have a substantial change. At the same time, the guitar strings with better performance have a balanced sound volume, a pronounced sound, a bright and pure treble, deep and thick bass, and a high bass sound volume.

Step 4: Inspection of other parts.

Look at whether the gear of the peg is damaged, whether the rotation is smooth, whether the panel, the back plate is cracked, and whether the paint is coordinated with the color of the piano. The most important thing is that the product must be smooth and the fingerboard must not be scratched.

PS: Attention point

1) Middle and low-grade guitars need to buy a piano cover, high-end guitars need to buy a violin case, so as to facilitate the storage of the guitar.

2) Keep the guitar close to the heater. If the air is too humid, put some desiccant inside the box.

3) High-end guitars are delicately crafted through sophisticated craftsmanship and materials, and are therefore particularly vulnerable to injury. Never put the guitar on the desk or on the floor.

4) There are also often played, ready to allow the guitar parts to fully shake, this is the best way to maintain the guitar.

Gear Reduction Motor is a component of a gear reducer and a motor. This type of component is also commonly referred to as a gearbox motor or a geared motor. It is usually assembled and assembled by a professional reducer manufacturer.
Gear reduction motors are widely used in automatic mechanical equipment, especially in packaging machinery, printing machinery, corrugated machinery, color box machinery, conveying machinery, food machinery, three-dimensional parking equipment, automatic storage, three-dimensional warehouse, chemical, textile, dyeing and finishing equipment, etc. Micro gear reduction motors are also widely used in the fields of electronic locks, optical equipment, precision instruments and financial equipment.

Gear reduction motor

Gear reduction motor,Reduction motor,Speed reducer motor,12 volt gear reduction motor,Gear reduction box electric motor,12v gear reduction motor

Shenzhen Maintex Intelligent Control Co., Ltd. , https://www.maintexmotor.com