Discussion on the situation of supplemental light in the current workroom

In intelligent buildings, there are working environments with different natures and different contents. Even if the specific division of labor of the same office space may be different, and considering the influence of physiological and psychological factors, the difference of people's visual satisfaction degree Especially outstanding.

According to the visual satisfaction degree curve, even if the desktop illumination is at the highest point of the curve, there are still people who are not satisfied with the illumination. That is to say, everyone will have the "best satisfaction illumination" as the design basis. , still will not meet satisfactory requirements for a considerable number of users. The modern office building is to create a comfortable and efficient building environment for people. For this purpose, it is necessary to be able to flexibly control the light environment, and to flexibly control the light environment of the local space without affecting the requirements of others.

At present, the combination of general illumination and local illumination provides a reasonable answer to the above problems. General illumination only provides the minimum illumination level required for the entire environment. For example, the illumination required for corridor corridors requires localized illumination using dimmable fixtures. Each person can flexibly adjust the lighting of the local environment through the remote control. In addition, the form of the small compartment also provides conditions for the lighting control of the local environment. Since the large space is separated, each worker adjusts his own part of the lighting intensity, and rarely affects the adjacent ones. staff member.

At the same time, when the worker leaves, he can turn off his own lighting fixtures without affecting other people. In the past, some people often influenced other work when they turned on and off the lights. People often do not turn on and off the lamps, traditional lighting methods and space arrangements can not meet the energy-saving needs of smart buildings. In addition, considering the aesthetics of the space, the lighting of the local light environment can be selected from the same specifications as the general lighting fixtures, and the dimming electronic ballast and other ancillary facilities can be used to achieve satisfactory dimming purposes.

Development Status of Local Light Environment Lighting Control Local environment lighting is usually in two forms, local lighting and work lighting.

In the office space, if these two forms are well combined with general lighting, good lighting effects can be achieved. The work lighting and the general lighting work lighting method combine the furniture design and directly install the light fixture on the furniture equipment. Therefore, the control of this mode does not affect the adjacent work area. See the picture operation lighting can use the dimmable table lamp in the embedded office furniture, because the wiring is also done with the furniture, it is usually used to increase or decrease the light level to adjust the lighting level. Apricot map work lighting and general lighting Because the work lighting method enters the modern office space, the lighting control of the local environment becomes much easier.

Workers can simply use the lighting fixtures on office furniture to obtain a comfortable visual environment, but this approach requires a combination of lighting and furniture layout, while taking into account the economic costs, this approach is limited.

In China, dimmable fluorescent lamps have not yet appeared. With the development of office buildings, the current development of lamps has been difficult to meet the requirements of people's light environment. In office-type intelligent buildings, the lighting control of the local light environment is bound to become an important part of the office environment. If you can use your current advanced electronic technology to develop your own dimming products, it will undoubtedly study the light environment control of smart buildings in China. Work has a tremendous boost. The development of modern office buildings should also meet the requirements of energy saving. Considering that the luminous efficacy of fluorescent lamps is relatively high, it is much higher than that of incandescent lamps. At the same time, the surface brightness of fluorescent lamps is low, glare is easy to control, and different color temperatures can be achieved. The cost of the lamp is much lower than that of other gas discharge sources. Therefore, fluorescent lamps have been chosen as the common source of light for office buildings.

As people's demand for light environment increases, lighting design should create a comfortable and comfortable building environment by creating a flexible and varied light environment, while flexible and variable light environment is inseparable from lighting control.

We are the leading and innovative manufacturer with professional research and development capacity in China.Now the product cover Micro USB to USB,

micro USB Connector,Micro USB 2.0 Cable. Etc.

Product information

This Micro USB  data cable can be connected to all the smart devices with MICRO interface to your computer USB port for sync and charging .

Data cable for synchronizing and recharging your phone

USB 2.0-compatible port

Data synchronization

Charges phone from your computer

Charges phone from a USB charger

Compatible with phones with a MICRO USB connector 

Micro USB Cable

Micro USB Cable, Micro USB to USB, USB Connector, Micro USB 2.0 Cable

Hebei Baisiwei Import&Export Trade Co., LTD. , https://www.baisiweicable.com