Or push PRO 6 Plus pass Meizu 12.30 and concert

[IT168 News] The legendary Meizu PRO 6 Plus has been widely talked about, but with Meizu’s invitation to release the new Charm Blue on December 6th, the November 30th was the last concert of Meizu this year. "The argument has been broken, and now there are users @ KJuma broke the news on the microblogging said Meizu will have a concert on December 30, no accident, highly anticipated Meizu PRO 6 Plus or Will formally meet with us.

Related links: Small screen flagship Meizu PRO 6 fell to 1795 yuan []

New machine released on December 30

Although it was reported that Nov. 30 will be Meizu’s last “concert” this year, Meizu officials have already sent an invitation letter to the media on Dec. 6th for the new product launch of Charm Blue, which also made it impossible for the previous rumors. Self-breaking. However, it seems that the Meizu conference on December 6th is still not a farewell performance of Meizu this year, according to the user @KJuma broke the news on Weibo, Meizu will also hold a "concert" on December 30, but there is no Disclose specific model information released.

Judging from the information currently available, several models of Meizu new machines that have previously achieved 3C certification have basically found ownership, such as Meizu M612M and M612Q, and Meizu M621Q/M621C/M621M are considered to be released on December 6th. Charm Blue Note 5 and Note Metal; and Meizu M682Q is determined to be Charm Blue X. Only the Meizu M686 and M686Q that do not support full Netcom have yet to determine their true identity, and if Meizu will indeed hold a "concert" on December 30, Then only released Meizu M686 and M686G.

Or for PRO 6 Plus

According to the information obtained so far, Meizu M686 and M686Q have been recognized as not supporting the full Netcom function in the approved radio transmission model list, so they are generally considered to be the Meizu PRO 6 Plus equipped with the Exy 8890 processor. At the same time, users have also been exposed on Weibo. In the ranking of friends of QQ Sports, the model name of Meizu PRO 6 Plus has appeared for the first time, which seems to confirm that the model exists.

Of course, the biggest question now is whether this so-called Meizu PRO 6 Plus is equipped with a Samsung Exynos 8890 processor, because there have been reports that the version has been cut. However, if the Meizu PRO 6 Plus is not equipped with Samsung platform, it seems that there is no other processor available, MediaTek Xnm 10nm process will not be shipped until at least the first quarter of next year, and the aircraft if you choose MediaTek X25 processor again, no doubt There will be less attractive highlights. Therefore, combining the Meizu M686 and M686Q does not support the biggest clue of Netcom, it may mean that Meizu PRO 6 Plus will be equipped with Exynos 8890 processor to meet with us.

Will push 6GB version

As for the main specifications of the Meizu PRO 6 Plus, the model “meizu_m96” that was previously exposed by the security Bunny seems to provide us with some answers. The aircraft will not only carry the Samsung Exynos 8890 processor, but will also be equipped with a 2K resolution display, a 4GB RAM+32GB ROM storage portfolio, and a 5 megapixel front-end and 12 megapixel main camera. At the same time, it was rumored that the opportunity had a storage mix of 6GB RAM+128GB ROM, but it did not use a double-curvature screen design, but a 5.7-inch face-up screen.

Of course, there are also news that this Meizu PRO 6 Plus may even be in sync with the Charm Blue X and Flyme 6 systems at the November 30 conference, but in any case the legendary Meizu PRO 6 Plus is already The closer it is, whether it is December 30 or November 30, perhaps the January 10 next year, let us wait and see.

Fiber Optic Patchcord

From the appearance, the "jumpers" of the board cards in the computer are small metal sticks (jumper posts) embedded on the motherboard, sound card, hard disk and other devices, and small clips (jumper clips) that are set on these metal sticks. The function of the jumper is to adjust the on-off relationship of different electrical signals on the device, and to adjust the working status of the device, such as determining the mainboard voltage, the master-slave relationship of the driver, and so on. When the jumper clip is put on two jumper posts at the same time, it means that the two jumper posts are connected. If only one or no jumper posts are put on, it means it is disconnected. It is very important to adjust the jumper. If it is jumped incorrectly, it may crash in some cases or even burn the entire device. Therefore, you must read the manual carefully when adjusting the jumper, and check the name of the jumper, the number of the jumper and the on-off relationship.
The jumpers on the motherboard generally include CPU setting jumpers, CMOS clear jumpers, and BIOS write prohibition jumpers. Among them, the CPU setting jumper is the most complicated. If the motherboard is relatively old, you must set the core voltage, FSB and frequency multiplier jumpers on the motherboard. According to the motherboard manual and CPU frequency, set the above corresponding jumpers. Normally, there is a set of jumpers corresponding to the CPU voltage on the motherboard, and each jumper corresponds to a voltage value. Find the appropriate voltage value, plug in a keycap to short it, and select this voltage value. In the same way, find the FSB jumper and multiplier jumper, and set the appropriate FSB and multiplier respectively. Note that only one jumper can be short-circuited in each group of jumpers.
The jumper here refers to the copper connecting wire, which is made of a standard jumper cable and connecting hardware. The jumper cable has copper cores ranging from two cores to eight cores. The connecting hardware is two 6-position or 8-position modular plugs. , Or they have one or more bare wire ends. Some jumpers have a modular plug at one end and an 8-position module slot at the other end, or are equipped with 100P wiring plugs, MICs, or module slots. Jumpers are used on the distribution frame to transfer various links, and can be used as a distribution frame or equipment connection cable. Both ends of the modular jumper are RJ45 connectors, adopt TIA/EIA-568A pin structure, and have a flexible plug-in design to prevent loosening and jamming. The length of the jumper is 1 foot (0.305 meters) to 500 feet (15.25 meters), the most commonly used are 3 feet, 5 feet, 7 feet and 10 feet. Modular jumpers are used in the work area and can also be used as jumpers in the wiring closet. In the small office network or home network DIY installation, the dual-computer interconnection jumper is often mentioned. This kind of jumper is not a standard jumper used in integrated wiring, but a special hardware device connection line. It is used when two PC computers are directly connected by twisted pair, or when two HUBs are to be connected through RJ45 ports. , You need crossover (commonly known as cross-connect wire, jumper). It follows a special connection sequence.

MTRJ Patchcord, ST Patchcord, FIN Patchcord, SC Patchcord, FC Patchcord, LC Patchcord

Shenzhen GL-COM Technology CO.,LTD. , https://www.szglcom.com