The cost has dropped by more than 40% and optical multi-touch has gradually become mainstream
The cost of Touch Ultrabook is expected to be greatly reduced. Dialog has released a reference design of innovative optical touch chips and modules. The solution can realize multi-touch through infrared planar scattering detection (PSD) technology without using indium tin oxide (ITO) ) Conductive film; compared to the general medium and large size projected capacitive touch module, the cost can be reduced by more than 40%, and the assembly yield is also significantly improved, which helps accelerate the decline in the price of touch Ultrabooks.
Mark Tyndall, vice president of global strategy development at Dialog, mentioned that projected capacitive touch will have more room for development in small and medium-sized applications in the future, and will be divided by optical touch in the medium and large-sized fields.
Mark Tyndall, vice president of global strategy development at Dialog, said that Microsoft, Intel and PC brands have high hopes for deformable laptops with multi-touch capabilities. However, new products must simultaneously meet the three major requirements of multi-touch, thin and light design and low additional cost. At present, the industry still cannot find suitable touch solutions, including resistive, image and sonic touch technologies, which have been early encountered by brands. Eliminated by the factory; even if the projected capacitive touch that is quite mature in mobile phones and tablets is used, it still faces the problems of excessive cost of ITO materials after enlargement in size, poor yield and poor performance.
With this in mind, Dialog and Flatfrog, which focuses on large and medium-sized touch solutions, combined with SmartWave and PSD touch technology patents of both parties, have developed a new generation of optical touch solutions that do not require an ITO conductive layer, which is expected to break through the touch Ultrabook or The current status of the development of AIO computers with high prices.
At present, Dialog has used a 65-nanometer (nm) process to create a control chip for this touch technology, and recently obtained Windows 8 certification, which will be introduced into mass production in the third quarter of this year. Tyndall emphasized that the new optical touch solution can meet the design of 11-36-inch edge-to-edge screen, and can directly detect the surface pressure of the panel and the change of the light source signal of the internal infrared light-emitting diode (LED). There is no need to import any sensing materials or components, which affects the module cost and transmittance.
Due to the simple system architecture, low price, and support for up to forty-point touch, this solution is expected to gradually replace the complex and expensive projected capacitive touch solution with a sensing layer design, and become the mainstream technology for large and medium-sized touch panels .
It is reported that at this stage, Dialog, PC brand manufacturers and panel makers are stepping up the development of 14-inch optical touch notebook samples; compared with projected capacitive touch products of the same specifications, the development cost per inch has dropped significantly by 40%; in the future more than 20 inches After the display or AIO computer is successively replaced with optical touch, the saved materials and the cost of process optimization will be more obvious. Tyndall also revealed that optical touch PCs are expected to be released in large quantities in the spring of 2014, accounting for 40% of the total touch PC shipments in 2 years.
In fact, in the US $ 300 million Ultrabook fund, Intel has also allocated about US $ 10 million to invest in Flatfrog and Dialog ’s optical multi-touch technology, which will accelerate the upstream and downstream supply of chips, modules and systems for new solutions The chain takes shape and promotes the decline in the average price of touch PCs, entering the mainstream price band below $ 600.
Smart RGBW bulbs add RGB colorful light based on the traditional warm light, they are suitable for home, bars and offices. No need to install the cable lines again, once the bulb is installed on the lamp holder, just turn on the switch, the traditional lighting can be immediately upgraded to smart RGBW lighting, you can enjoy the convenience and interest brought by smart lighting.
Users can choose the light mode according to time, scene, mood, and also can adjust the brightness, color temperature and color of the light. With the grouping function on the App, each group can control up to 48 products, users can set 7-8 groups on one App, total around 350 products can be controlled via one App. You can set the light turn on / off time by the timing function. Using energy-saving and high-quality LED lamp beads, the light source is stable without stroboscopic, the effective life can be more than 20000 hours. Our LED products can meet global quality standards and pass European testing by TUV Rheinland. Bulbs have certifications such as EMC, RED, LVD, ROHS, REACH, ERP and FCC.
The App are developed on the most advanced Bluetooth Mesh technology. [LinkupHome" App can be downloaded in the App store or Google Player, then you can control our product without any complicate steps. The App is stable, easy control and multifunctional.
The advantages of Bluetooth Mesh are fast connect, low power consumption, no password required and Ad-Hoc Network. No need WIFI and hubs, as long as you have a Bluetooth-enabled smart phone, you can experience the smart light. When you install several smart bulbs, the self-organizing network function can make the signals free connect, break the limitation of distance.
Product Parameters
Description: Bluetooth Mesh RGB Bulb with APP
Bluetooth: CSR Bluetooth Mesh
Control Qty: 1-48 pcs
Control distance: 20m
Product dimension: Dia66mm * H122mm
Material: PC & Aluminum & Nylon
Working Voltage: 100-240V
Frequency: 50/60Hz
Color Temperature: RGB+Warm White (3000K)
LED Power: 9.5W (710lm)
Base Type: E27/E26/B22 available
Warranty: 2 Years
Certification: CE(EMC,RED), ROHS,FCC
Color box size: 15.3*7.4*7.4cm
G.W. of Unit: 0.22kg
N.W. of Unit: 0.18kg
Phone Controlled Light Switch,Phone Control Bulb,Smart Wireless Light,Group Control Bulb
Ningbo Homey Photoelectric Technology. Co., Ltd , https://www.linkuphome.com