Who is the organization that deploys the smartest manufacturing? Analysis of Advanced Manufacturing Investment
[Whoever has the most intelligent manufacturing layout? Analysis of Advanced Manufacturing Investment 】European think-tank combed 62 domestic advanced manufacturing companies currently publicly disclosed financing, 109 participating institutions, found 24 institutions involved in investment, and found that domestic related investment reached its climax in 2017, A Companies before and after the round currently accounted for the majority of robots and manufacturing equipment companies.
Due to the wide range of smart manufacturing, the eYio think tank focuses on three advanced manufacturing-related fields of industrial robots and processing equipment, industrial vision and factory digitization and intelligence (industrial networking, industrial big data, etc.). Several years of publicly released financing data were studied. Due to the fact that many companies did not disclose the amount of financing information and the data were missing, the analysis of the financing amount was not conducted. According to the Yiou think-tank, many institutions’ investment in the manufacturing sector has not been disclosed, so this study can only partially reflect the investment in related fields.
According to the inaccurate statistics of the Yiou think-tank, there are more than 100 domestic institutions and companies involved in the investment in smart manufacturing, but the degree of concentration is relatively low. About 78% of them are only involved in the investment of a related company, and institutions that participate in the investment of more than three companies only Less than 6%. About 10% of the institutions participating in investment are listed companies or professional industrial capitals, and institutions with industrial backgrounds are close to 20%. The institutions involved in investing more are shown in the following table (where the number of participating companies is the same, ranking by the first letter of the alphabet), it can be seen that old-style Internet venture capital still occupy the main position.
From the time of the latest announcement of the investment, there are few related financing events before 2016. Relevant investments began to increase in 2016 and reached a peak in 2017. In 2018, related financing has dropped. Through the statistics in the figure and the analysis of the development of the industry, the Eurasia think tank believes that the early investment climax of advanced manufacturing has gradually passed. If there is no new technology or significant driving factor, the window of new entry into the advanced manufacturing industry is gradually closing.
From the latest round of financing announced by the invested companies, companies before and after the A round occupied the majority. This also corresponds to the development of the industry. Many companies have entered the market verification stage of products by 2017, and after the market verification in 2018, the sales speed of products is expected to increase. It is worth noting that a considerable number of advanced manufacturing and financing companies have been established for many years, but they have just received capital financing around 2017. Many of these companies call their first round of financing as A round of financing, and have different development paths with the newly established start-up companies.
From the perspective of specific investment fields, among the 62 companies that have invested in the Euro-China Think Tank Statistics, robotics and manufacturing equipment accounted for half, 34 companies, 11 industrial vision-related companies, and 17 companies related to industrial digitalization and internet of things. Among them, the overall investment in robotics and manufacturing equipment is relatively decentralized. There are 5 or even more than 7 institutions participating in the investment, except for Dresdner CNC, Vermiculite Robotics, Geek+, Orange Automation, and Yifei Automation. Most companies only have 1-2 companies Investment, and the organization is very scattered.
In the field of industrial vision, there are several institutions investing in Cooper, Acqui Technology, and High Vision Technology. Many institutions, such as Baidu Ventures, Tongchuang Waiye and GGV, have all focused their investment on this field.
In areas such as industrial digitalization and the Internet of Things, major well-known internet investment institutions such as Zhente, Jingwei, Jinshajiang, Dachen, Songjing, and BAI are concentrated. Since this part of the company is based on IT technology and is mostly a start-up company, it is an area where Internet VC has a greater influence.
On the whole, comprehensive statistical data and the information privately understood by Yiou Think Pools reveal that the actual advanced manufacturing enterprises and institutions participating in the investment arrangement are obviously more than the data in the text, and some companies that have already obtained a new round of investment in 2018 The financing has not been announced, and many manufacturing companies are not active in publishing financing, so there is a certain amount of error in judging the entire smart manufacturing investment through open financing information.
Combined with specific research in related fields, Yiou Thinkbank found that compared with many Internet companies, enterprise development in the field of smart manufacturing is slower than that of many Internet companies, and market space in many subdivided areas is relatively small, and they are being squeezed by the industry giants. The competition is grim. The current investment opportunities mainly come from software-related new technologies, which are subdivided into specific sub-fields, and few excellent investment targets are available. Some companies that have been established for many years and have accumulated in the industry have become the key targets for this round of smart manufacturing investment.
ZGAR Foggy Box 7000
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
Our products include disposable e-cigarettes, rechargeable e-cigarettes, rechargreable disposable vape pen, and various of flavors of cigarette cartridges. From 600puffs to 5000puffs, ZGAR bar Disposable offer high-tech R&D, E-cigarette improves battery capacity, We offer various of flavors and support customization. And printing designs can be customized. We have our own professional team and competitive quotations for any OEM or ODM works.
We supply OEM rechargeable disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.
ZGAR FB7000 Vape,ZGAR Foggy Box 7000 disposable electronic cigarette, FB7000 vape pen atomizer , FB7000 E-cig,Foggy Box 7000 disposable electronic cigarette,ZGAR Foggy Box 7000 disposable vape,zgar foggy box
ZGAR INTERNATIONAL(HK)CO., LIMITED , https://www.szvape-pen.com